Accessori per contenitori
Robust-Box
Sistema duale di contenitori con IP 66
Nella linea ROBUST-BOX entrambe le metà dei contenitori sono dotate di filetti preformati. Pertanto siete voi, in qualità di utilizzatori, a decidere se usare come parte inferiore la metà piatta o quella rialzata.
- Vasta scelta con 11 misure di base, altezze diverse e 2 materiali standard
- ABS (UL 94 HB), di provata validità come contenitore per il montaggio di morsetti
- PC (UL 94 HB), contenitore solido e robusto in grado di resistere a forti sollecitazioni e a temperature elevate
- Contenitori trasparenti alle radiofrequenze
- Utilizzabile come contenitore da scrivania, a muro o su guide DIN
- Facilità di montaggio; le singole metà del contenitore 'maschio e femmina' possono essere impiegate indifferentemente come parte superiore o inferiore
- Superficie di comando incavata a protezione della tastiera a membrana
- Fissaggio del coperchio al di fuori dell'area di tenuta e assicurato da viti imperdibili in acciaio inox
- Montaggio a muro diretto o mediante linguette di fissaggio esterne
- Pellicole di copertura colorate per la codifica (in alternativa alle versioni standard di colore grigio chiaro)
- Punti di fissaggio per schede e componenti di montaggio
- Numerosi accessori: piedini, cerniera, elementi di fissaggio alle guide DIN, supporto per schede per l'inserimento di moduli premontati ecc.
Application Fields
Impianti elettrici, ad es. nella tecnica di riscaldamento, condizionamento e ventilazione per apparecchi di controllo e di monitoraggio, nella realizzazione di sistemi di controllo e di impianti e dei sistemi di sicurezza. Ma è utilizzabile anche in ambito elettronico, ad es. come contenitore per tastiera, unità di controllo, sensori in interni ecc.
Scegliete la versione e la misura o le misure desiderate oppure cliccate sul pulsante “Seleziona tutti i prodotti” alla fine della lista dei prodotti.
A0306031
Self-tapping screws 3 x 6 mm (PZ1)
Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastening components, boards and PCBs onto pillars.
Supply 1 self-tapping screw
A0306031
Self-tapping screws 3 x 6 mm (PZ1)Prodotto aggiunto alla lista
A0308031
Self-tapping screws 3 x 8 mm (PZ1)
Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastening components, boards and PCBs onto pillars.
Supply 1 self-tapping screw
A0308031
Self-tapping screws 3 x 8 mm (PZ1)Prodotto aggiunto alla lista
A0308132
Self-tapping screw 3 x 8 mm (T10)
Self-tapping screw with T10 Torx drive. For fastening components, boards and PCBs onto pillars.
Supply 1 self-tapping screw
A0308132
Self-tapping screw 3 x 8 mm (T10)Prodotto aggiunto alla lista
A9325018
Pole/mast mounting bracket
For the secure and stable mounting of IP rated electronic enclosures to poles, masts, and pipes using cable ties or stainless steel screw bands, suitable for pole diameters from 30 mm. The bracket is attached to the rear of the enclosure (four drilled holes required) and is manufactured from UV resistant material.
Note:
Every application (environment, sealing requirements, enclosure size/version, mast diameter, etc.) is different. For this reason, no mounting screws, cable ties or stainless steel screw bands are supplied; only the mast/pipe bracket is included. However, on request, we can provide a wide range of solutions tailored precisely to the intended application.
Supply 1 pole/mast mounting bracket
A9325018
Pole/mast mounting bracketProdotto aggiunto alla lista
anthracite grey RAL 7016
100x100x20mm
C2200801
Cover strips 80, without holes
Simply clip into top or base (2 pcs. necessary).
Supply 1 cover strip without holes for top
C2200801
Cover strips 80, without holesProdotto aggiunto alla lista
light grey RAL 7035
C2201082
Cover strips 80
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2201082
Cover strips 80Prodotto aggiunto alla lista
silver grey RAL 7001
C2201084
Cover strips 80
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2201084
Cover strips 80Prodotto aggiunto alla lista
red RAL 3020
C2201085
Cover strips 80
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2201085
Cover strips 80Prodotto aggiunto alla lista
yellow RAL 1023
C2201086
Cover strips 80
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2201086
Cover strips 80Prodotto aggiunto alla lista
green RAL 6024
C2201087
Cover strips 80
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2201087
Cover strips 80Prodotto aggiunto alla lista
blue RAL 5017
C2201088
Fastening elements to DIN-Rails
For fastening the cases to DIN-rails according to DIN EN 60 715 TH35. For ROBUST-BOX width 80.
Supply 2 fastening elements, assembly kit
C2201088
Fastening elements to DIN-RailsProdotto aggiunto alla lista
light grey RAL 7035
C2201201
Cover strips 120, without holes
Simply clip into top or base (2 pcs. necessary).
Supply 1 cover strip without holes for top
C2201201
Cover strips 120, without holesProdotto aggiunto alla lista
light grey RAL 7035
C2201601
Cover strips 160, without holes
Simply clip into top or base (2 pcs. necessary).
Supply 1 cover strip without holes for top
C2201601
Cover strips 160, without holesProdotto aggiunto alla lista
light grey RAL 7035
C2202001
Cover strips 200, without holes
Simply clip into top or base (2 pcs. necessary).
Supply 1 cover strip without holes for top
C2202001
Cover strips 200, without holesProdotto aggiunto alla lista
light grey RAL 7035
C2202401
Cover strips 240, without holes
Simply clip into top or base (2 pcs. necessary).
Supply 1 cover strip without holes for top
C2202401
Cover strips 240, without holesProdotto aggiunto alla lista
light grey RAL 7035
C2203123
Cover strips 120
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2203123
Cover strips 120Prodotto aggiunto alla lista
silver grey RAL 7001
C2203124
Cover strips 120
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2203124
Cover strips 120Prodotto aggiunto alla lista
red RAL 3020
C2203125
Cover strips 120
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2203125
Cover strips 120Prodotto aggiunto alla lista
yellow RAL 1023
C2203126
Cover strips 120
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2203126
Cover strips 120Prodotto aggiunto alla lista
green RAL 6024
C2203127
Cover strips 120
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2203127
Cover strips 120Prodotto aggiunto alla lista
blue RAL 5017
C2203128
Fastening elements to DIN-Rails
For fastening the cases to DIN-rails according to DIN EN 60715 TH35. For ROBUST-BOX width 120.
Supply 2 fastening elements, assembly kit
C2203128
Fastening elements to DIN-RailsProdotto aggiunto alla lista
light grey RAL 7035
C2204162
Cover strips 160
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2204162
Cover strips 160Prodotto aggiunto alla lista
silver grey RAL 7001
C2204164
Cover strips 160
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2204164
Cover strips 160Prodotto aggiunto alla lista
red RAL 3020
C2204165
Cover strips 160
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2204165
Cover strips 160Prodotto aggiunto alla lista
yellow RAL 1023
C2204166
Cover strips 160
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2204166
Cover strips 160Prodotto aggiunto alla lista
green RAL 6024
C2204167
Cover strips 160
Optional supplies to the light grey coloured standard versions. Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug.
Supply 2 cover strips with holes, 2 cover strips without holes
C2204167
Cover strips 160Prodotto aggiunto alla lista
blue RAL 5017
C2204168
Fastening elements to DIN-Rails
For fastening the cases to DIN-rails according to DIN EN 60715 TH35. For ROBUST-BOX width 160.
Supply 2 fastening elements, assembly kit
C2204168
Fastening elements to DIN-RailsProdotto aggiunto alla lista
light grey RAL 7035
C2210801
Cover strips 80, with holes
Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug (2 pcs. necessary).
Supply 1 cover strip with holes for bottom
C2210801
Cover strips 80, with holesProdotto aggiunto alla lista
light grey RAL 7035
C2211201
Cover strips 120, with holes
Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug (2 pcs. necessary).
Supply 1 cover strip with holes for bottom
C2211201
Cover strips 120, with holesProdotto aggiunto alla lista
light grey RAL 7035
C2211601
Cover strips 160, with holes
Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug (2 pcs. necessary).
Supply 1 cover strip with holes for bottom
C2211601
Cover strips 160, with holesProdotto aggiunto alla lista
light grey RAL 7035
C2212001
Cover strips 200, with holes
Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug (2 pcs. necessary).
Supply 1 cover strip with holes for bottom
C2212001
Cover strips 200, with holesProdotto aggiunto alla lista
light grey RAL 7035
C2212401
Cover strips 240, with holes
Simply clip into top or base. Pair of cover strips with 2 holes to put in rubber feet or security plug (2 pcs. necessary).
Supply 1 cover strip with holes for bottom
C2212401
Cover strips 240, with holesProdotto aggiunto alla lista
light grey RAL 7035
C2299018
Case feet
When using the case for desktop applications.
Supply 4 case feet
C2299018
Case feetProdotto aggiunto alla lista
C2299028
Wall mounting brackets
Elements for exterior wall mounting after assembly of the unit.
Supply 4 pieces including fixing elements
C2299028
Wall mounting bracketsProdotto aggiunto alla lista
light grey RAL 7035
C2299031
Securing hinge for the cover
For securing the cover (top part) when opening the enclosure.
Use with ROBUST BOX: the cover retention device can be mounted either on the right, left, top or bottom. Not suitable for sizes 200 x 300 mm and 240 x 360 mm.
Use with SOLID BOX: pre-moulded mounts for installation on the long sides of the bottom and top parts.
Use with ROBUST BOX: the cover retention device can be mounted either on the right, left, top or bottom. Not suitable for sizes 200 x 300 mm and 240 x 360 mm.
Use with SOLID BOX: pre-moulded mounts for installation on the long sides of the bottom and top parts.
Supply 2 securing hinges
C2299031
Securing hinge for the coverProdotto aggiunto alla lista
natural-coloured
C2299040
Security plug
For use with lead tags.
Supply 1 plug
C2299040
Security plugProdotto aggiunto alla lista
light grey RAL 7035
C2299042
Security kit width 120
For use with lead tags.
Supply 4 plugs, 2 cover strips with holes for the top
C2299042
Security kit width 120Prodotto aggiunto alla lista
light grey RAL 7035
C2299046
Security kit width 160
For use with lead tags.
Supply 4 plugs, 2 cover strips with holes for the top
C2299046
Security kit width 160Prodotto aggiunto alla lista
light grey RAL 7035
C2299048
Security kit width 80
For use with lead tags.
Supply 4 plugs, 2 cover strips with holes for the top
C2299048
Security kit width 80Prodotto aggiunto alla lista
light grey RAL 7035
C2299058
PCB support
For mounting pre-assembled PCB units. Suitable for: 200 x 120 mm for Eurocard size and all other cases width 120 mm.
Supply 2 PCB support, assembly kit (threaded bushes, screws)
C2299058
PCB supportProdotto aggiunto alla lista
light grey RAL 7035
C2299068
PCB support
For mounting pre-assembled PCB units. Suitable for ROBUST-BOXES width 80 mm and width 160 mm.
Supply 4 PCB support, assembly kit (threaded bushes, screws)
C2299068
PCB supportProdotto aggiunto alla lista
light grey RAL 7035
C2299088
Hinge
For cases: 120, 160, 200 and 240 mm length or width. Additional machining (drilling) required.
Supply 2 complete hinges
C2299088
HingeProdotto aggiunto alla lista
light grey RAL 7035
C2306917
Pressure equalisation element M6x0.75
Pressure equalisation elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 6.5 L/min - 0.25 bar; 16.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Airflow: 6.5 L/min - 0.25 bar; 16.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Supply 1 pressure equalisation element, 1 seal washer, 1 nut
C2306917
Pressure equalisation element M6x0.75Prodotto aggiunto alla lista
light grey RAL 7035
C2310917
Pressure equalisation element M10x1
Pressure equalisation elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 19.5 L/min - 0.25 bar; 43.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Airflow: 19.5 L/min - 0.25 bar; 43.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Supply 1 pressure equalisation element, 1 seal washer, 1 nut
C2310917
Pressure equalisation element M10x1Prodotto aggiunto alla lista
light grey RAL 7035
C2320137
Cable grommet
Simple cable grommet, easy to install, with easy-to-pierce membrane. Tight fit as soon as the cable is pulled backwards a little. Free of halogens. Suitable for wall thicknesses from 1 - 4 mm and for cable diameters from 8 - 13 mm. Operating temperatures from -40°C to +100°C. Borehole ø 20.5 mm.
Supply 1 cable grommet
C2320137
Cable grommetProdotto aggiunto alla lista
light grey RAL 7035
Opzioni prodotto per Robust-Box
Che caratteristiche deve avere il vostro prodotto personalizzato? Su richiesta vi forniamo i contenitori e manopole pronti per il montaggio e con tutte le modifiche e le caratteristiche specifiche.
