Ricerca avanzata N. ordinazione
Login Your location/language Switzerland, Italian
A9164001 Key ring

A9164001

Key ring

Version: diameter = 20.5 mm.

Supply

1 key ring

  • Componenti adatti

System components to complete

A9064107 SMART-CASE XS

A9064107

SMART-CASE XS Miniature case composed of 2 parts with eyelet hole for a keyring. Possibilities for fixing PCBs in base part. Assembly of top and base part by screwing. Space for a 12 V round cell and small round cells.

Supply Base and top part, 1 screw

Chiudi

A9064107

SMART-CASE XS
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
58x35,6x19mm
IP 40
A9064109 SMART-CASE XS

A9064109

SMART-CASE XS Miniature case composed of 2 parts with eyelet hole for a keyring. Possibilities for fixing PCBs in base part. Assembly of top and base part by screwing. Space for a 12 V round cell and small round cells.

Supply Base and top part, 1 screw

Chiudi

A9064109

SMART-CASE XS
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
58x35,6x19mm
IP 40
A9064209 SMART-CASE XS

A9064209

SMART-CASE XS Miniature case composed of 2 parts with eyelet hole for a keyring. Possibilities for fixing PCBs in base part. Polished front area for utmost effectiveness when exposed to infra-red light. Assembly of top and base part by screwing. Space for a 12 V round cell and small round cells.

Supply Base and top part, 1 screw

Chiudi

A9064209

SMART-CASE XS
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
58x35,6x19mm
IP 40
B1604107 BODY-CASE M, without recess

B1604107

BODY-CASE M, without recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version Without recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Chiudi

B1604107

BODY-CASE M, without recess
Prodotto aggiunto alla lista
ASA (UL 94 HB)
traffic white RAL 9016
50x41x15mm
IP 65
B1604117 BODY-CASE M, without recess

B1604117

BODY-CASE M, without recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version Without recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Chiudi

B1604117

BODY-CASE M, without recess
Prodotto aggiunto alla lista
ASA (UL 94 HB)
traffic white RAL 9016
50x41x15mm
IP 65
B1604207 BODY-CASE M, with recess

B1604207

BODY-CASE M, with recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Recessed area in top for locating a membrane keyboard or decor foil. Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version With recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Chiudi

B1604207

BODY-CASE M, with recess
Prodotto aggiunto alla lista
ASA (UL 94 HB)
traffic white RAL 9016
50x41x14mm
IP 65
B1604217 BODY-CASE M, with recess

B1604217

BODY-CASE M, with recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Recessed area in top for locating a membrane keyboard or decor foil. Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version With recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Chiudi

B1604217

BODY-CASE M, with recess
Prodotto aggiunto alla lista
ASA (UL 94 HB)
traffic white RAL 9016
50x41x14mm
IP 65
B1606107 BODY-CASE L, without recess

B1606107

BODY-CASE L, without recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version Without recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Chiudi

B1606107

BODY-CASE L, without recess
Prodotto aggiunto alla lista
ASA (UL 94 HB)
traffic white RAL 9016
55x46x17mm
IP 65
B1606117 BODY-CASE L, without recess

B1606117

BODY-CASE L, without recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version Without recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Chiudi

B1606117

BODY-CASE L, without recess
Prodotto aggiunto alla lista
ASA (UL 94 HB)
traffic white RAL 9016
55x46x17mm
IP 65
B1606207 BODY-CASE L, with recess

B1606207

BODY-CASE L, with recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Recessed area in top for locating a membrane keyboard or decor foil. Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version With recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Chiudi

B1606207

BODY-CASE L, with recess
Prodotto aggiunto alla lista
ASA (UL 94 HB)
traffic white RAL 9016
55x46x16mm
IP 65
B1606217 BODY-CASE L, with recess

B1606217

BODY-CASE L, with recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Recessed area in top for locating a membrane keyboard or decor foil. Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version With recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Chiudi

B1606217

BODY-CASE L, with recess
Prodotto aggiunto alla lista
ASA (UL 94 HB)
traffic white RAL 9016
55x46x16mm
IP 65
B1608107 BODY-CASE XL, without recess

B1608107

BODY-CASE XL, without recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version Without recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Chiudi

B1608107

BODY-CASE XL, without recess
Prodotto aggiunto alla lista
ASA (UL 94 HB)
traffic white RAL 9016
62x56x18mm
IP 65
B1608117 BODY-CASE XL, without recess

B1608117

BODY-CASE XL, without recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version Without recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Chiudi

B1608117

BODY-CASE XL, without recess
Prodotto aggiunto alla lista
ASA (UL 94 HB)
traffic white RAL 9016
62x56x18mm
IP 65
B1608207 BODY-CASE XL, with recess

B1608207

BODY-CASE XL, with recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Recessed area in top for locating a membrane keyboard or decor foil. Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version With recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Chiudi

B1608207

BODY-CASE XL, with recess
Prodotto aggiunto alla lista
ASA (UL 94 HB)
traffic white RAL 9016
62x56x17mm
IP 65
B1608217 BODY-CASE XL, with recess

B1608217

BODY-CASE XL, with recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Recessed area in top for locating a membrane keyboard or decor foil. Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version With recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Chiudi

B1608217

BODY-CASE XL, with recess
Prodotto aggiunto alla lista
ASA (UL 94 HB)
traffic white RAL 9016
62x56x17mm
IP 65
B1706001 Eyelet / pocket clip kit

B1706001

Eyelet / pocket clip kit Special accessories for BODY-CASE. Kit consisting of 1 pocket clip for shirt or trouser pocket, 1 fastening eyelet for lanyard/chain/cord as well as 2 covers for closing one or both rear wrist strap attachments if required. Fastening with spring bars (supplied with the enclosures).

Supply 1 kit

Chiudi

B1706001

Eyelet / pocket clip kit
Prodotto aggiunto alla lista
ASA (UL 94 HB)
traffic white RAL 9016
B9002302 Intermediate ring DS

B9002302

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DS

Chiudi

B9002302

Intermediate ring DS
Prodotto aggiunto alla lista
TPE
lava
B9002303 Intermediate ring DS

B9002303

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DS

Chiudi

B9002303

Intermediate ring DS
Prodotto aggiunto alla lista
SEBS (TPE)
orange
B9002304 Intermediate ring DS

B9002304

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DS

Chiudi

B9002304

Intermediate ring DS
Prodotto aggiunto alla lista
SEBS (TPE)
green
B9002305 Intermediate ring DS

B9002305

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DS

Chiudi

B9002305

Intermediate ring DS
Prodotto aggiunto alla lista
TPE
blue
B9002306 Intermediate ring DS

B9002306

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring DS

Chiudi

B9002306

Intermediate ring DS
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
B9002307 Intermediate ring DS

B9002307

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DS

Chiudi

B9002307

Intermediate ring DS
Prodotto aggiunto alla lista
SEBS (TPE)
off-white RAL 9002
B9002308 Intermediate ring DS

B9002308

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DS

Chiudi

B9002308

Intermediate ring DS
Prodotto aggiunto alla lista
TPE
volcano
B9002309 Intermediate ring DS

B9002309

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring DS

Chiudi

B9002309

Intermediate ring DS
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
B9002352 Intermediate ring DS

B9002352

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DS

Chiudi

B9002352

Intermediate ring DS
Prodotto aggiunto alla lista
TPE
lava
B9002353 Intermediate ring DS

B9002353

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DS

Chiudi

B9002353

Intermediate ring DS
Prodotto aggiunto alla lista
TPE
orange
B9002354 Intermediate ring DS

B9002354

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DS

Chiudi

B9002354

Intermediate ring DS
Prodotto aggiunto alla lista
TPE
green
B9002355 Intermediate ring DS

B9002355

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DS

Chiudi

B9002355

Intermediate ring DS
Prodotto aggiunto alla lista
TPE
blue
B9002356 Intermediate ring DS

B9002356

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring DS

Chiudi

B9002356

Intermediate ring DS
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
B9002357 Intermediate ring DS

B9002357

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DS

Chiudi

B9002357

Intermediate ring DS
Prodotto aggiunto alla lista
SEBS (TPE)
off-white RAL 9002
B9002358 Intermediate ring DS

B9002358

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DS

Chiudi

B9002358

Intermediate ring DS
Prodotto aggiunto alla lista
TPE
volcano
B9002359 Intermediate ring DS

B9002359

Intermediate ring DS Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring DS

Chiudi

B9002359

Intermediate ring DS
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
B9002702 Intermediate ring ES

B9002702

Intermediate ring ES Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring ES

Chiudi

B9002702

Intermediate ring ES
Prodotto aggiunto alla lista
TPE
lava
B9002703 Intermediate ring ES

B9002703

Intermediate ring ES Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring ES

Chiudi

B9002703

Intermediate ring ES
Prodotto aggiunto alla lista
TPE
orange
B9002704 Intermediate ring ES

B9002704

Intermediate ring ES Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring ES

Chiudi

B9002704

Intermediate ring ES
Prodotto aggiunto alla lista
TPE
green
B9002705 Intermediate ring ES

B9002705

Intermediate ring ES Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring ES

Chiudi

B9002705

Intermediate ring ES
Prodotto aggiunto alla lista
TPE
blue
B9002706 Intermediate ring ES

B9002706

Intermediate ring ES Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring ES

Chiudi

B9002706

Intermediate ring ES
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
B9002707 Intermediate ring ES

B9002707

Intermediate ring ES Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring ES

Chiudi

B9002707

Intermediate ring ES
Prodotto aggiunto alla lista
TPE
off-white RAL 9002
B9002708 Intermediate ring ES

B9002708

Intermediate ring ES Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring ES

Chiudi

B9002708

Intermediate ring ES
Prodotto aggiunto alla lista
TPE
volcano
B9002709 Intermediate ring ES

B9002709

Intermediate ring ES Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring ES

Chiudi

B9002709

Intermediate ring ES
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
B9002806 Bottom and top part ES

B9002806

Bottom and top part ES Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring ES as separate article necessary.

Supply 1 top and bottom part ES, 1 self-tapping screw

Chiudi

B9002806

Bottom and top part ES
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
52x32x15mm
B9002807 Bottom and top part ES

B9002807

Bottom and top part ES Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring ES as separate article necessary.

Supply 1 top and bottom part ES, 1 self-tapping screw

Chiudi

B9002807

Bottom and top part ES
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
52x32x15mm
B9002808 Bottom and top part ES

B9002808

Bottom and top part ES Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring ES as separate article necessary.

Supply 1 top and bottom part ES, 1 self-tapping screw

Chiudi

B9002808

Bottom and top part ES
Prodotto aggiunto alla lista
ABS (UL 94 HB)
lava
52x32x15mm
B9002856 Bottom and top part ES

B9002856

Bottom and top part ES Assembly unit: Modern, flat styling. Easy to carry.Fixing supports for PCBs/components in the case bottom. Intermediate ring ES as separate article necessary.

Supply 1 top and bottom part ES, 1 self-tapping screw

Chiudi

B9002856

Bottom and top part ES
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
52x32x15mm
B9002857 Bottom and top part ES

B9002857

Bottom and top part ES Assembly unit: Modern, flat styling. Easy to carry.Fixing supports for PCBs/components in the case bottom. Intermediate ring ES as separate article necessary.

Supply 1 top and bottom part ES, 1 self-tapping screw

Chiudi

B9002857

Bottom and top part ES
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
52x32x15mm
B9002858 Bottom and top part ES

B9002858

Bottom and top part ES Assembly unit: Modern, flat styling. Easy to carry.Fixing supports for PCBs/components in the case bottom. Intermediate ring ES as separate article necessary.

Supply 1 top and bottom part ES, 1 self-tapping screw

Chiudi

B9002858

Bottom and top part ES
Prodotto aggiunto alla lista
ABS (UL 94 HB)
lava
52x32x15mm
B9002906 Bottom and top part DS

B9002906

Bottom and top part DS Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring DS as separate article necessary.

Supply 1 top and bottom part DS, 1 self-tapping screw

Chiudi

B9002906

Bottom and top part DS
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
51x32x13mm
B9002907 Bottom and top part DS

B9002907

Bottom and top part DS Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring DS as separate article necessary.

Supply 1 top and bottom part DS, 1 self-tapping screw

Chiudi

B9002907

Bottom and top part DS
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
51x32x13mm
B9002908 Bottom and top part DS

B9002908

Bottom and top part DS Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring DS as separate article necessary.

Supply 1 top and bottom part DS, 1 self-tapping screw

Chiudi

B9002908

Bottom and top part DS
Prodotto aggiunto alla lista
ABS (UL 94 HB)
lava
51x32x13mm
B9004302 Intermediate ring DM

B9004302

Intermediate ring DM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DM

Chiudi

B9004302

Intermediate ring DM
Prodotto aggiunto alla lista
TPE
lava
B9004303 Intermediate ring DM

B9004303

Intermediate ring DM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DM

Chiudi

B9004303

Intermediate ring DM
Prodotto aggiunto alla lista
TPE
orange
B9004304 Intermediate ring DM

B9004304

Intermediate ring DM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DM

Chiudi

B9004304

Intermediate ring DM
Prodotto aggiunto alla lista
TPE
green
B9004305 Intermediate ring DM

B9004305

Intermediate ring DM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DM

Chiudi

B9004305

Intermediate ring DM
Prodotto aggiunto alla lista
TPE
blue
B9004306 Intermediate ring DM

B9004306

Intermediate ring DM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring DM

Chiudi

B9004306

Intermediate ring DM
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
B9004307 Intermediate ring DM

B9004307

Intermediate ring DM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DM

Chiudi

B9004307

Intermediate ring DM
Prodotto aggiunto alla lista
SEBS (TPE)
off-white RAL 9002
B9004308 Intermediate ring DM

B9004308

Intermediate ring DM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DM

Chiudi

B9004308

Intermediate ring DM
Prodotto aggiunto alla lista
TPE
volcano
B9004309 Intermediate ring DM

B9004309

Intermediate ring DM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring DM

Chiudi

B9004309

Intermediate ring DM
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
B9004702 Intermediate ring EM

B9004702

Intermediate ring EM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring EM

Chiudi

B9004702

Intermediate ring EM
Prodotto aggiunto alla lista
TPE
lava
B9004703 Intermediate ring EM

B9004703

Intermediate ring EM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring EM

Chiudi

B9004703

Intermediate ring EM
Prodotto aggiunto alla lista
TPE
orange
B9004704 Intermediate ring EM

B9004704

Intermediate ring EM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring EM

Chiudi

B9004704

Intermediate ring EM
Prodotto aggiunto alla lista
TPE
green
B9004705 Intermediate ring EM

B9004705

Intermediate ring EM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring EM

Chiudi

B9004705

Intermediate ring EM
Prodotto aggiunto alla lista
TPE
blue
B9004706 Intermediate ring EM

B9004706

Intermediate ring EM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring EM

Chiudi

B9004706

Intermediate ring EM
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
B9004707 Intermediate ring EM

B9004707

Intermediate ring EM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring EM

Chiudi

B9004707

Intermediate ring EM
Prodotto aggiunto alla lista
TPE
off-white RAL 9002
B9004708 Intermediate ring EM

B9004708

Intermediate ring EM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring EM

Chiudi

B9004708

Intermediate ring EM
Prodotto aggiunto alla lista
TPE
volcano
B9004709 Intermediate ring EM

B9004709

Intermediate ring EM Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring EM

Chiudi

B9004709

Intermediate ring EM
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
B9004776 Intermediate ring EM, Micro USB 5 P, B Type SMT

B9004776

Intermediate ring EM, Micro USB 5 P, B Type SMT Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Version With opening for Micro USB-connector 5 P, B Type SMT

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004776

Intermediate ring EM, Micro USB 5 P, B Type SMT
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
B9004778 Intermediate ring EM, Micro USB 5 P, B Type SMT

B9004778

Intermediate ring EM, Micro USB 5 P, B Type SMT Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Version With opening for Micro USB-connector 5 P, B Type SMT

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004778

Intermediate ring EM, Micro USB 5 P, B Type SMT
Prodotto aggiunto alla lista
SEBS (TPE)
volcano
B9004779 Intermediate ring EM, Micro USB 5 P, B Type SMT

B9004779

Intermediate ring EM, Micro USB 5 P, B Type SMT Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Version With opening for Micro USB-connector 5 P, B Type SMT

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004779

Intermediate ring EM, Micro USB 5 P, B Type SMT
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
B9004782 Intermediate ring EM, high

B9004782

Intermediate ring EM, high Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Version high.

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004782

Intermediate ring EM, high
Prodotto aggiunto alla lista
SEBS (TPE)
lava
B9004783 Intermediate ring EM, high

B9004783

Intermediate ring EM, high Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Version high.

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004783

Intermediate ring EM, high
Prodotto aggiunto alla lista
TPE
orange
B9004784 Intermediate ring EM, high

B9004784

Intermediate ring EM, high Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Version high.

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004784

Intermediate ring EM, high
Prodotto aggiunto alla lista
SEBS (TPE)
green
B9004785 Intermediate ring EM, high

B9004785

Intermediate ring EM, high Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Version high.

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004785

Intermediate ring EM, high
Prodotto aggiunto alla lista
TPE
blue
B9004786 Intermediate ring EM, high

B9004786

Intermediate ring EM, high Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Version high.

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004786

Intermediate ring EM, high
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
B9004787 Intermediate ring EM, high

B9004787

Intermediate ring EM, high Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Version high.

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004787

Intermediate ring EM, high
Prodotto aggiunto alla lista
SEBS (TPE)
off-white RAL 9002
B9004788 Intermediate ring EM, high

B9004788

Intermediate ring EM, high Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Version high.

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004788

Intermediate ring EM, high
Prodotto aggiunto alla lista
TPE
volcano
B9004789 Intermediate ring EM, high

B9004789

Intermediate ring EM, high Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Version high.

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004789

Intermediate ring EM, high
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
B9004796 Intermediate ring EM, USB type A

B9004796

Intermediate ring EM, USB type A Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. USB cover as accessory.

Version With opening for USB-connector type A according to DIN IEC 61076-3-107

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004796

Intermediate ring EM, USB type A
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
B9004798 Intermediate ring EM, USB type A

B9004798

Intermediate ring EM, USB type A Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection. USB cover as accessory.

Version With opening for USB-connector type A according to DIN IEC 61076-3-107

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004798

Intermediate ring EM, USB type A
Prodotto aggiunto alla lista
SEBS (TPE)
volcano
B9004799 Intermediate ring EM, USB type A

B9004799

Intermediate ring EM, USB type A Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. USB cover as accessory.

Version With opening for USB-connector type A according to DIN IEC 61076-3-107

Supply 1 intermediate ring EM, 1 self-tapping screw

Chiudi

B9004799

Intermediate ring EM, USB type A
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
B9004806 Bottom and top part EM

B9004806

Bottom and top part EM Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring EM as separate article necessary.

Supply 1 top and bottom part EM, 1 self-tapping screw

Chiudi

B9004806

Bottom and top part EM
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
68x42x18mm
B9004807 Bottom and top part EM

B9004807

Bottom and top part EM Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring EM as separate article necessary.

Supply 1 top and bottom part EM, 1 self-tapping screw

Chiudi

B9004807

Bottom and top part EM
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
68x42x18mm
B9004808 Bottom and top part EM

B9004808

Bottom and top part EM Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring EM as separate article necessary.

Supply 1 top and bottom part EM, 1 self-tapping screw

Chiudi

B9004808

Bottom and top part EM
Prodotto aggiunto alla lista
ABS (UL 94 HB)
lava
68x42x18mm
B9004856 Bottom and top part EM

B9004856

Bottom and top part EM Assembly unit: Modern, flat styling. Easy to carry. Fixing supports for PCBs/components in the case bottom. Intermediate ring EM as separate article necessary.

Supply 1 top and bottom part EM, 1 self-tapping screw

Chiudi

B9004856

Bottom and top part EM
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
68x42x18mm
B9004857 Bottom and top part EM

B9004857

Bottom and top part EM Assembly unit: Modern, flat styling. Easy to carry. Fixing supports for PCBs/components in the case bottom. Intermediate ring EM as separate article necessary.

Supply 1 top and bottom part EM, 1 self-tapping screw

Chiudi

B9004857

Bottom and top part EM
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
68x42x18mm
B9004858 Bottom and top part EM

B9004858

Bottom and top part EM Assembly unit: Modern, flat styling. Easy to carry. Fixing supports for PCBs/components in the case bottom. Intermediate ring EM as separate article necessary.

Supply 1 top and bottom part EM, 1 self-tapping screw

Chiudi

B9004858

Bottom and top part EM
Prodotto aggiunto alla lista
ABS (UL 94 HB)
lava
68x42x18mm
B9004906 Bottom and top part DM

B9004906

Bottom and top part DM Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring DM as separate article necessary.

Supply 1 top and bottom part DM, 1 self-tapping screw

Chiudi

B9004906

Bottom and top part DM
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
70x44x16mm
B9004907 Bottom and top part DM

B9004907

Bottom and top part DM Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring DM as separate article necessary.

Supply 1 top and bottom part DM, 1 self-tapping screw

Chiudi

B9004907

Bottom and top part DM
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
70x44x16mm
B9004908 Bottom and top part DM

B9004908

Bottom and top part DM Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring DM as separate article necessary.

Supply 1 top and bottom part DM, 1 self-tapping screw

Chiudi

B9004908

Bottom and top part DM
Prodotto aggiunto alla lista
ABS (UL 94 HB)
lava
70x44x16mm
B9006302 Intermediate ring DL

B9006302

Intermediate ring DL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DL

Chiudi

B9006302

Intermediate ring DL
Prodotto aggiunto alla lista
TPE
lava
B9006303 Intermediate ring DL

B9006303

Intermediate ring DL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DL

Chiudi

B9006303

Intermediate ring DL
Prodotto aggiunto alla lista
TPE
orange
B9006304 Intermediate ring DL

B9006304

Intermediate ring DL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DL

Chiudi

B9006304

Intermediate ring DL
Prodotto aggiunto alla lista
TPE
green
B9006305 Intermediate ring DL

B9006305

Intermediate ring DL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DL

Chiudi

B9006305

Intermediate ring DL
Prodotto aggiunto alla lista
TPE
blue
B9006306 Intermediate ring DL

B9006306

Intermediate ring DL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring DL

Chiudi

B9006306

Intermediate ring DL
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
B9006307 Intermediate ring DL

B9006307

Intermediate ring DL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DL

Chiudi

B9006307

Intermediate ring DL
Prodotto aggiunto alla lista
SEBS (TPE)
off-white RAL 9002
B9006308 Intermediate ring DL

B9006308

Intermediate ring DL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring DL

Chiudi

B9006308

Intermediate ring DL
Prodotto aggiunto alla lista
TPE
volcano
B9006309 Intermediate ring DL

B9006309

Intermediate ring DL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring DL

Chiudi

B9006309

Intermediate ring DL
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
B9006702 Intermediate ring EL

B9006702

Intermediate ring EL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring EL

Chiudi

B9006702

Intermediate ring EL
Prodotto aggiunto alla lista
TPE
lava
B9006703 Intermediate ring EL

B9006703

Intermediate ring EL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring EL

Chiudi

B9006703

Intermediate ring EL
Prodotto aggiunto alla lista
TPE
orange
B9006704 Intermediate ring EL

B9006704

Intermediate ring EL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring EL

Chiudi

B9006704

Intermediate ring EL
Prodotto aggiunto alla lista
SEBS (TPE)
green
B9006705 Intermediate ring EL

B9006705

Intermediate ring EL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring EL

Chiudi

B9006705

Intermediate ring EL
Prodotto aggiunto alla lista
TPE
blue
B9006706 Intermediate ring EL

B9006706

Intermediate ring EL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring EL

Chiudi

B9006706

Intermediate ring EL
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
B9006707 Intermediate ring EL

B9006707

Intermediate ring EL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring EL

Chiudi

B9006707

Intermediate ring EL
Prodotto aggiunto alla lista
SEBS (TPE)
off-white RAL 9002
B9006708 Intermediate ring EL

B9006708

Intermediate ring EL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together. TPE gives a pleasant touch sensation and impact protection.

Supply 1 intermediate ring EL

Chiudi

B9006708

Intermediate ring EL
Prodotto aggiunto alla lista
TPE
volcano
B9006709 Intermediate ring EL

B9006709

Intermediate ring EL Assembly unit: simply insert the intermediate ring between bottom and top part and screw the case together.

Supply 1 intermediate ring EL

Chiudi

B9006709

Intermediate ring EL
Prodotto aggiunto alla lista
ABS (UL 94 HB)
black RAL 9005
B9006806 Bottom and top part EL

B9006806

Bottom and top part EL Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring EL as separate article necessary.

Supply 1 top and bottom part EL, 2 self-tapping screws

Chiudi

B9006806

Bottom and top part EL
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
78x48x20mm
B9006807 Bottom and top part EL

B9006807

Bottom and top part EL Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring EL as separate article necessary.

Supply 1 top and bottom part EL, 2 self-tapping screws

Chiudi

B9006807

Bottom and top part EL
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
78x48x20mm
B9006808 Bottom and top part EL

B9006808

Bottom and top part EL Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring EL as separate article necessary.

Supply 1 top and bottom part EL, 2 self-tapping screws

Chiudi

B9006808

Bottom and top part EL
Prodotto aggiunto alla lista
ABS (UL 94 HB)
lava
78x48x20mm
B9006816 Bottom and top part EL

B9006816

Bottom and top part EL Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring EL as separate article necessary.

Supply 1 top and bottom part EL, 2 self-tapping screws

Chiudi

B9006816

Bottom and top part EL
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
78x48x24mm
B9006817 Bottom and top part EL

B9006817

Bottom and top part EL Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring EL as separate article necessary.

Supply 1 top and bottom part EL, 2 self-tapping screws

Chiudi

B9006817

Bottom and top part EL
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
78x48x24mm
B9006818 Bottom and top part EL

B9006818

Bottom and top part EL Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring EL as separate article necessary.

Supply 1 top and bottom part EL, 2 self-tapping screws

Chiudi

B9006818

Bottom and top part EL
Prodotto aggiunto alla lista
ABS (UL 94 HB)
lava
78x48x24mm
B9006826 Bottom and top part EL

B9006826

Bottom and top part EL Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring EL as separate article necessary.

Supply 1 top and bottom part EL, 2 self-tapping screws

Chiudi

B9006826

Bottom and top part EL
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
78x48x26mm
B9006827 Bottom and top part EL

B9006827

Bottom and top part EL Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring EL as separate article necessary.

Supply 1 top and bottom part EL, 2 self-tapping screws

Chiudi

B9006827

Bottom and top part EL
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
78x48x26mm
B9006828 Bottom and top part EL

B9006828

Bottom and top part EL Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring EL as separate article necessary.

Supply 1 top and bottom part EL, 2 self-tapping screws

Chiudi

B9006828

Bottom and top part EL
Prodotto aggiunto alla lista
ABS (UL 94 HB)
lava
78x48x26mm
B9006856 Bottom and top part EL

B9006856

Bottom and top part EL Assembly unit: Modern, flat styling. Easy to carry. Fixing supports for PCBs/components in the case bottom. Intermediate ring EL as separate article necessary.

Supply 1 top and bottom part EL, 2 self-tapping screws

Chiudi

B9006856

Bottom and top part EL
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
78x48x20mm
B9006857 Bottom and top part EL

B9006857

Bottom and top part EL Assembly unit: Modern, flat styling. Easy to carry. Fixing supports for PCBs/components in the case bottom. Intermediate ring EL as separate article necessary.

Supply 1 top and bottom part EL, 2 self-tapping screws

Chiudi

B9006857

Bottom and top part EL
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
78x48x20mm
B9006858 Bottom and top part EL

B9006858

Bottom and top part EL Assembly unit: Modern, flat styling. Easy to carry. Fixing supports for PCBs/components in the case bottom. Intermediate ring EL as separate article necessary.

Supply 1 top and bottom part EL, 2 self-tapping screws

Chiudi

B9006858

Bottom and top part EL
Prodotto aggiunto alla lista
ABS (UL 94 HB)
lava
78x48x20mm
B9006906 Bottom and top part DL

B9006906

Bottom and top part DL Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring DL as separate article necessary.

Supply 1 top and bottom part DL, 2 self-tapping screws

Chiudi

B9006906

Bottom and top part DL
Prodotto aggiunto alla lista
PMMA (IR) (UL 94 HB)
black RAL 9005
84x53x19mm
B9006907 Bottom and top part DL

B9006907

Bottom and top part DL Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring DL as separate article necessary.

Supply 1 top and bottom part DL, 2 self-tapping screws

Chiudi

B9006907

Bottom and top part DL
Prodotto aggiunto alla lista
ABS (UL 94 HB)
off-white RAL 9002
84x53x19mm
B9006908 Bottom and top part DL

B9006908

Bottom and top part DL Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring DL as separate article necessary.

Supply 1 top and bottom part DL, 2 self-tapping screws

Chiudi

B9006908

Bottom and top part DL
Prodotto aggiunto alla lista
ABS (UL 94 HB)
lava
84x53x19mm

Accessory "carrying"

B9100063 Carrying strap, textile lanyard

B9100063

Carrying strap, textile lanyard Textile lanyard with loop attachment.

ATTTENTION, PART TO BE DISCONTINUED:
The article is only available in limited quantities. Please ask for it!

Supply 1 lanyard

Chiudi

B9100063

Carrying strap, textile lanyard
Prodotto aggiunto alla lista
black
860mm
  • Dati tecnici
  • Purchasing Data
Materiale
Colore
nickel-plated
Diameter
20,5 mm
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Weight/1 part
1 g
Customs tariff number
(OKW product)
73182100
Country of manufacture
Other country